Chase Associates Quick-Opening Model CM-2 Manways open into the vessel and seal an ASME flanged and dished cover against a liquid-tight, replaceable gasket. The handwheel release operates only when the tank is empty and provides access in seconds without unbolting or use of tools. Conforms with OSHA Permit Required Confined Space Rules.
Model CM-2 Manways are designed for vertical wall access into new or existing stainless steel or carbon steel bolted or welded tanks. Each Model CM-2 is fabricated to meet your specific application requirements including type of material, wall thickness, tank radius, static head pressure and the correct gasketing for the tank contents.
Where welding is prohibited, request a mounting flange ring drilled to match your specifications (Model CM-2P – Steel Wall Tank). Rings are rolled to the tank radius and welded to the manway sleeve for bolt-up installations in steel tanks. This model can be customized for unusual situations and optionally provided with sightglasses and sample ports.
Each manway comes with an OSHA approved lockout/tagout feature to prevent accidental openings or closings. Since the static pressure of the tank contents is pushing the cover against the gasket, it cannot be accidentally opened once the contents are above
the level of the manway. Optionally, we can provide a Security Cover which locks over the exterior of the manway effectively securing the handwheel and hinge assembly.
Model CM-2 products conform to the following: Welding Procedures-ASME Code Sec IX, WPS CA-FC 8/8, FCAW (all welders are ASME certified); AWWA D100-96 Section 7.1 Shell Manholes and OSHA “Permit-Required Confined Space” entry rules Part 1910.146. Material Test Reports are provided on all materials.
Ethanol Processing, Pulp & Papermaking, Wastewater Treatment Plants, Municipal Water Storage Tanks, Storage and Processing Tanks, Agricultural Storage Silos and other steel Constructed Tanks, including bolt-up installations in glass lined tanks when fitted with our drilled mounting flange ring.